Experienced   embroidery   machine   operators   are   for   the most   part   quite   proficient   when   it   comes   to   hooping garments   accurately   so   that   the   logo   is   always   straight and   in   the   right   position……..but   for   newcomers   to   the industry   and/or   new   staff   this   can   be   a   frustrating,   and costly procedure. Like   most   great   inventions,   Hoopmaster   was   invented   by the    owners    of    a    business    in    the    US    who    became frustrated   with   constant   mistakes   that   were   being   made in   their   shop.      So,   they   came   up   with   this   excellent design that truly overcomes those problems: The     Hoopmaster     main     workstation     and     portable workstation   provide   a   simple,   quick   and   easy   way   to hoop   garments   accurately   every   time.      Available   to   suit most makes of commercial embroidery machines.

We   all   know   how   difficult   it   can   be   to embroider   onto   a   pocket.   In   fact   many embroidery   services   just   don’t   offer   that service    or    charge    like    a    wounded    bull because    they    have    to    remove    the    pocket    from    the garment,   then   embroidery   it   and   then   sew   it   back   onto the garment again. After   developing   their   cap   embroidery   hoop,   Barudan have   now   taken   it   another   step   forward   with   an   optional pocket   hoop   that   clips   into   the   standard   cap   hoop   driver unit.

Barudan   machines   are   built   very   well   indeed   and   in order    to    perform    to    the    very    high    levels    that    our customers   require   they   are   constructed   with   high   quality steels and alloys. Like   all   high   speed   machines   it   is   important   to   run   them on   a   very   strong   and   solid   base.      Whilst   the   CA11   can be   used   on   a   solid   table,   we   recommend   the   use   of   the optional   steel   machine   stand   designed   to   provide   the most stable working condition with minimal vibration.

Yet another breakthrough and innovation from the designers of the Hoopmaster, Mighty Hoops have overcome problems that have plagued embroidery business owners since automatic embroidery machines were first used.   Problems like…….. • Hooping   garments   (even   with   thicker   fabrics)   has become    virtually    effortless    with    Mighty    Hoops. That’s   because   the   two   parts   (Upper   &   lower)   pull themselves   together   with   powerful   magnetic   force, requiring no physical effort. • Hoop     burn     is     what     happens     when     regular embroidery   hoops   leave   a   shiny   mark   on   fabrics.     This is due to the • shearing   action   as   the   inner   and   outer   hoop   parts slide   over   the   surface   of   the   fabric   under   pressure.     Hoop   burn   marks   can   be   very   difficult   to   remove especially on synthetic fabrics. • Regular    embroidery    hoops    are    perfect    for    most fabrics   but   they   are   not   ideally   suited   to   thick   and can   pop   open   part-way   through   an   embroidery.      To make   matters   worse,   these   types   of   product   tend to   be   embroidered   with   large,   logos   that   take   time to   run   and   use   more   thread   and   backing   -   so   when a   hoop   pops   part-way   through   a   design,   you   can lose    both    the    time,    thread    and    backing    and potentially   the   cost   of   the   product   too   if   it   can’t   be repaired. So what’s the secret to Mighty Hoop’s success? Well    there    are    two    major    design    factors    that    make Mighty   hoops   such   a   huge   success   with   embroiderers   all over the world. First   -   A   series   of   extra   powerful   ‘SUPER’   magnets   that hold   the   upper   and   lower   parts   of   the   hoop   together.        Man   they   are   strong!      In   fact   the   hoops   have   a   warning notice on them. You   see   a   normal   hoop   that   has   both   an   inner   and   an outer   part   loses   its   gripping   power   very   quickly   once   it starts   to   pop   open.   But   the   Mighty   Hoop’s   magnets   keep pulling    the    upper    and    lower    parts    together    very powerfully. Second   -   There   is   no   shearing   action   to   make   the   fabric shiny.         That’s   because   there   are   no   inner   and   outer hoops   -   only   upper   and   lower   parts   both   of   which   have   a rough   gripping   surface   to   hold   the   fabric   firmly   in   place without marking. Even better - When used in combination with the Hoopmaster you get the above-mentioned advantages plus super accurate logo positioning on garments without wrist or hand strain

Sales & Technical Support

Melbourne Showroom & Warehouse

Manage and transfer embroidery designs to your machines wirelessly (A USB port is required on each machine) Send directly from Embroidery Studio With a single click, send your design directly from Embroidery Studio e4.5 to your embroidery machine. Barcode scanner ready Connect a bar-code scanner directly to your EmbroideryConnect device and pull designs from the all- new EmbroideryHub Queue. LED notification lights Vibrant colour-coded LED lights provide instant feedback on the status of your EmbroideryConnect device.